0

Your Cart

0
Subtotal: AUD0
No products in the cart.

Power Systems Technical Articles

Our experts continuously work on power systems problems, and we share solutions with Practical Reference Articles.

The main topics are earthing system modeling, power cable ratings, HV/LV electrical design, protective device coordination, and arc flash studies. We cover IEC and IEEE standards.

Sign up for my email newsletter and I will send you the latest technical articles as they are released – Jayson Patrick.

Photo of Jayson Patrick for Technical Articles page about electrical power systems Design

Choose the article category

Latest
Popular
Low Voltage Design
Earthing Design
High Voltage Cable Design
Arc Flash Studies
Software Comparisons
Electrical Software
Illustration of two electrical cables: one with a single copper conductor and the other with multiple layers including insulation, shielding, and a copper conductor.
10 mins read

Ampacity Calculations for Southwire Power Cables

We performed ampacity calculations for hundreds of industrial and utility power cables from Southwire. The assumptions used for modelling in the software are explained. The calculated ampacities were all within 3 % of the values given in ICEA and NEC standards.
Diagram showing electric field (E), gravitational field (G), weight (W), and electrostatic force (Fe) acting on a charged oil drop.
10 mins read

Modelling a Fall of Potential Earth Grid Impedance Test

Understand how software simulations enhance grid impedance tests, improving accuracy and efficiency in earthing system design and performance evaluation.
Infrared image of cable tray showing temperature gradients with adjacent diagrams labeled Flat (1), Flat (2), Trefoil (1), Trefoil (2), and check or crossmarks indicating status.
8 mins read

Ampacity of Power Cables Installed in Trays

Explore the factors affecting cable ampacity in trays, including thermal and electromagnetic effects. Learn calculation methods and best practices for safe power cable installations.
Infographic on power systems earthing standards, featuring diagrams and guidelines for substation earthing, touch/step voltage limits, and testing. Includes industry logos and software ad.
4 mins read

Standards for Power Systems Earthing Design

Experienced electrical engineers created this reference list of standards for power systems earthing/grounding for substations, renewable energy, etc.
Solar panels on Sydney building 1 1170x585 - Popular
5 mins read

Voltage Rise Calculations

Voltage rise can occur in solar PV systems on the AC side between the power inverters and network connection point. Voltage rise calculations are no different to those for voltage drop.
A trench with several large orange pipes protruding through a rectangular board. Workers and construction materials are in the background.
5 mins read

Soil Temperature Calculations for Power Engineering

Soil temperature affects high voltage cable and earthing systems. Equations for soil temperature calculations based on air temperature are provided.
Crushed blue metal rock and foundation in switchyard 1 1170x585 - Popular
3 mins read

Surface Material Resistivity

This article provides typical values for surface layer resistivity to be used for earthing and ground electrical calculations of touch and step voltages.
Electricity pylon with insulators against a cloudy sky.
10 mins read

Fault Current Distribution for Cable Transmission Lines

This report explains how to perform accurate earth fault current analysis for substations connected by cable transmission lines. Earth fault currents for simple cable and overhead transmission lines are explained first. Next, two case studies involving hybrid cable transmission lines are presented.
Wind turbine foundation 1170x585 - Popular
13 mins read

Wind Farm Earthing Design and Modelling Guide

The technical guide explains the electrical systems, local WTG and combined earthing system design, touch and step voltage hazards, soil electrical resistivity measurements, earth fault currents, earthing system software modelling, and validation testing of earthing for wind farms.
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

For information or to speak with our helpful advisors

GET IN TOUCH

GET IN TOUCH

Gray logo with the word "ELEK" and a circular design featuring multiple hexagons.

Electrical Power Systems Design & Analysis Software

FOLLOW US

LinkedIn
YouTube
Facebook

SOFTWARE

Free Calculators

RESOURCES & SUPPORT

CONTACT US

Email:
enquiry@elek.com

Need Help?
Ask a Question
Lodge a Support Ticket

Phone:
AU: 1300 093 795
UK: +44 020 3603 5333
USA: +1 888 226 9651

© 2025 ELEK® Software. All Rights Reserved.

Privacy Policy Quality PolicySecurity Policy Terms of Use