0

Your Cart

0
Subtotal: AUD0
No products in the cart.

Power Systems Technical Articles

Our experts continuously work on power systems problems, and we share solutions with Practical Reference Articles.

The main topics are earthing system modeling, power cable ratings, HV/LV electrical design, protective device coordination, and arc flash studies. We cover IEC and IEEE standards.

Sign up for my email newsletter and I will send you the latest technical articles as they are released – Jayson Patrick

Photo of Jayson Patrick for Technical Articles page about electrical power systems Design

Choose the article category

Latest
Popular
Low Voltage Design
Earthing Design
High Voltage Cable Design
Arc Flash Studies
Software Comparisons
Electrical Software
Close-up of orange industrial cables coiled together, with one frayed open end visible in the foreground.
10 mins read

AS/NZS 3008 Cable Sizing Calculations: Step-by-Step Guide

Size active, neutral, and earth cables using AS/NZS 3008. The guide covers current capacity, voltage drop, and short-circuit calculations with examples.
Close-up of an electrical panel displaying several circuit breakers, labeled with yellow tags such as QF1, QF2, and QF6, and connected by various colored wires.
4 mins read

The Ultimate MCB Protective Device Selection Guide

Miniature Circuit Breakers (MCBs) protect against overcurrent in electrical circuits. MCBs are categorised based on their tripping characteristics, represented by different device curves such as Z, B, C, K, and D. This article offers guidance on selecting the right type for your application.
Screenshot of an application showing an edit load panel with fields for electrical installation, description, and phases. A photo of a 6-socket outlet adapter, quantity set to 12, is highlighted in red.
3 mins read

Double Socket-outlets in Maximum Demand Calculations

The AS/NZS 3000 Standard provides different rules in Appendix C for maximum demand with socket-outlets for domestic, commercial, and industrial electrical installations. Calculation examples are provided involving double socket-outlets.
Electrical Wiring Being Installed for a New Commercial Building
7 mins read

Economic and Energy Efficient Cable Sizing

The principle of economic cable sizing is to select a minimum cable size that is safe to use and the cost of the losses over the lifetime is also minimised.
Orange PVC electrical conduit of different sizes
7 mins read

Conduit Sizing Requirements with Example Calculations

Equations for calculating conduit sizes and space factors in accordance with standards are provided. Worked examples of conduit sizing calculations are provided.
Short circuit cable rating ELEK Software 1 1170x585 - Articles - Low Voltage Design
4 mins read

Short Circuit Power Cable Sizing Explained

The fault current which flows in a power cable causes its temperature to rise dramatically. The adiabatic equations for calculating the minimum conductor size to withstand the short circuit are explained.
ELEK Software Vehicle Charging Station 1170x585 - Articles - Low Voltage Design
3 mins read

Touch Voltage Calculations for LV Electrical Systems

The definition of “touch voltage” is the voltage between accessible exposed and extraneous conductive parts that may lead to the risk of electric shock in the event of an electrical fault. This article covers AS/NZS 3000, BS 7671, and NFPA 70E rules concerning touch voltages and provides the equations for calculations.
1654491769111 1 1170x585 - Articles - Low Voltage Design
12 mins read

Solar PV systems – DC cable sizing with examples

DC cable sizing has significant implications on a PV system's performance, total cost, and safety. Example calculations of Current Rating and Voltage Rise have been provided.
Electric Analogue Voltmeter on Switchgear Panel ELEK Software 1170x585 - Articles - Low Voltage Design
4 mins read

Voltage Drop Calculation Method with Examples

Equations and method with all steps for accurate voltage drop calculations including power factor, cable operating temperature, resistance, reactance, DC, 1-phase or 3-phase, balanced/unbalanced with calculation examples provided.
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

For information or to speak with our helpful advisors

GET IN TOUCH

GET IN TOUCH

Gray logo with the word "ELEK" and a circular design featuring multiple hexagons.

Electrical Power Systems Design & Analysis Software

FOLLOW US

LinkedIn
YouTube
Facebook

SOFTWARE

Free Calculators

RESOURCES & SUPPORT

CONTACT US

Email:
enquiry@elek.com

Need Help?
Ask a Question
Lodge a Support Ticket

Phone:
AU: 1300 093 795
UK: +44 020 3603 5333
USA: +1 888 226 9651

© 2025 ELEK® Software. All Rights Reserved.

Privacy Policy Quality PolicySecurity Policy Terms of Use