This article explains why dynamic ratings are important when dealing with long AC cables for wind farms. An example calculation of a dynamic rating which uses the measured load profile is given.

Waveform cables are commonly used in the UK for low-voltage power networks. The term waveform refers to the way the neutral/earth wires are laid around the cores/bedding. Using this configuration enables the neutral/earth wires to be opened so a connection can be made to the conductors anywhere along its length.

This article analyses the magnetic fields produced by electrical power cables installed in various configurations under varying conditions in the context of a health and safety-related issue. A software program has been used for calculating the results based on the Biot-Savart law. Techniques for the mitigation of magnetic fields are also presented.

We have benchmarked our Cable HV Software current rating results for 110 kV cables against the well-known software CYMCAP. We have shown the results are virtually identical (under 1.5 % difference).