ELEK Software

High Voltage Power Cable Ampacity and Design Training (Live in AEST)
2025-03-26 09:00 - 2025-03-27 13:00 (Australia/Sydney) | Delivered Online via Live Stream in AEST timezone (GMT+10), Level 5, 11 York Street, Sydney, NSW, Australia
Home / Training / Events

Events

March 25

-

March 27

Ready to book?

Get Tickets

Course Overview

This practical hands-on course will teach you how to perform earthing design modelling and calculations using ELEK SafeGrid Earthing Software. The course is delivered by our team of earthing experts via online using presentations, hands-on practical exercises, live demonstrations, and Q&A sessions. The course is suitable for attendees from beginner level to seasoned earthing experts. Attendees are sure to gain a lot of useful practical skills and technical knowledge. This course is eligible to 12 hours of professional development (CPD) with Engineers Australia, and other such engineering accreditating institutions.

Attendance Options

Live Online

12 hours delivered over three consecutive days during business hours in London (GMT) timezone.

Ready to book?

Get Tickets

Course Outline

This course will cover the following aspects of using ELEK SafeGrid Earthing Software:

Fundamentals of Earthing System Modelling

What is the purpose of earthing system modelling?What are the main components of earthing modelling software?What happens during an earth fault?Invalidity of equipotential grid models and maximum grid size.How to reduce grid impedance and GPR.Effects of grid area, burial depth, conductor size, compression ratio, and number of conductors on performance.How should you use earthing rods?How to model:Metal fences.Concrete slabs.Ground enhancement materials. Multilayer soil resistivity measurements and modelling.Safety criteria and reach touch voltage concept.High-frequency modelling.

Earthing Systems Design

What is the earthing system design process?What are the relevant earthing design standards?Applicable safety criteria and how to use them.How to determine acceptable step and touch voltages.Distribution system earthing:What resistance should the grid be?Should HV and LV be common bonded or separately earthed?Understanding the relevant project requirements.Structuring a professional earthing design report.Hands-on practical design of a substation earthing system following all the steps.

Lightning Protection Design

Risk analysis for lightning protection design.What are the methods for lightning protection design (rolling sphere, collection volume, protection angle)?Hands-on design of a substation lightning protection system using the rolling sphere method.

Technical Features and Modules of SafeGrid

What is the earthing system design process?How to use the modules including:Design Settings.Fault Current Distribution.Soil Modelling.Build Grid including importing CAD files.Safety Criteria and voltage profiles.Display Results.Hands-on practical exercises teaching how to use the modules.

Hands-on Software Modelling

Modelling of grids.Conductor sizing and modelling the effects.Optimal rod spacing.Soil resistivity modelling from Wenner field measurements.Fall-of-potential test simulation.Fault current distribution calculation for complex cable and overhead line systems.

Prerequisites

An understanding of basic earthing concepts such as what is grid resistance, grid potential rise, earth faults, and touch voltage, will help. You will need to have access to a licenced copy of ELEK SafeGrid Earthing Software. A general awareness of what the software is for, and its applications would be beneficial. Please contact us if you would need to organise a licenced copy of SafeGrid for the course.

What's Included

The registration fee covers live online attendance for one attendee. An official certificate of completion suitable for claiming CPD points.

About the Presenter

Jayson Patrick

Jayson is an electrical power engineer with 20 years of experience in electrical power engineering design and electrical power systems modelling.
Jayson is currently the technical director at ELEK Software and leads a team of electrical power engineers, technical researchers, and software developers.
Jayson has extensive experience delivering technical software training and presenting technial papers to audiences.

Terms & Conditions

1. Pricing and TaxAll prices quoted are exclusive of GST unless otherwise specified.2. Course Booking and ConfirmationBookings are confirmed only upon full payment.A confirmation email with event details, access links, and materials will be issued once registration is complete.ELEK reserves the right to decline registrations if participant limits are exceeded or if eligibility criteria are not met.3. Cancellations and RefundsCancellations made more than five (5) business days prior to the scheduled start date may be transferred to another available session without penalty.Cancellations made within five (5) business days of the course start date will forfeit the full course fee.Substitute attendees are welcome at no additional charge.If ELEK cancels or reschedules a session due to insufficient participant numbers or unforeseen circumstances, participants will be notified.4. Course DeliveryTraining sessions may be conducted in person or online.5. Certificates and Professional Development (CPD)Courses qualify for Type II CPD hours (as listed in each session).6. Intellectual PropertyAll course materials, software demonstrations, and recordings remain the intellectual property of ELEK Software.Participants may not reproduce, share, or distribute content without prior written consent.7. Data Privacy and CommunicationParticipant information will be used strictly for event administration and relevant ELEK communications (as per our Privacy Policy).ELEK complies with the Spam Act 2003 (Cth) and all relevant privacy regulations.8. LiabilityELEK Software will not be liable for indirect, incidental, or consequential damages arising from participation in the course or reliance on training content.Total liability shall not exceed the course fee paid.9. Governing LawThese terms are governed by the laws of New South Wales, Australia, and disputes shall be resolved in its courts.10. ContactFor any questions regarding terms, cancellations, or registration:sales@elek.com ELEK Software, Level 6.03, 234–242 George Street, Sydney NSW 2000, Australia

Pricing

Tickets

The numbers below include tickets for this event already in your cart. Clicking "Get Tickets" will allow you to edit any existing attendee information as well as change ticket quantities.

Earthing & Lightning System Modelling and Design Training (Live in GMT) [17/2/26]

USD
1,100.00

18 available

Decrease ticket quantity for Earthing & Lightning System Modelling and Design Training (Live in GMT) [17/2/26]
-

Quantity

Increase ticket quantity for Earthing & Lightning System Modelling and Design Training (Live in GMT) [17/2/26]
+

Quantity:
0

Total:

USD
0.00

Get Tickets

Change Currency:

USD (Default)

AUD

EUR

GBP

CAD

NZD

BRL

CHF

DKK

HKD

ILS

INR

JPY

MXN

NOK

PLN

SEK

SGD

ZAR

High Voltage Power Cable Ampacity and Design Training (Live in GMT)
2025-03-19 08:00 - 2025-03-21 12:00 (Europe/London) | Delivered Online via Live Stream in UK timezone (GMT), Level 5, 11 York Street, Sydney, NSW, Australia
Home / Training / Events

Events

March 25

-

March 27

Ready to book?

Get Tickets

Course Overview

This practical hands-on course will teach you how to perform earthing design modelling and calculations using ELEK SafeGrid Earthing Software. The course is delivered by our team of earthing experts via online using presentations, hands-on practical exercises, live demonstrations, and Q&A sessions. The course is suitable for attendees from beginner level to seasoned earthing experts. Attendees are sure to gain a lot of useful practical skills and technical knowledge. This course is eligible to 12 hours of professional development (CPD) with Engineers Australia, and other such engineering accreditating institutions.

Attendance Options

Live Online

12 hours delivered over three consecutive days during business hours in London (GMT) timezone.

Ready to book?

Get Tickets

Course Outline

This course will cover the following aspects of using ELEK SafeGrid Earthing Software:

Fundamentals of Earthing System Modelling

What is the purpose of earthing system modelling?What are the main components of earthing modelling software?What happens during an earth fault?Invalidity of equipotential grid models and maximum grid size.How to reduce grid impedance and GPR.Effects of grid area, burial depth, conductor size, compression ratio, and number of conductors on performance.How should you use earthing rods?How to model:Metal fences.Concrete slabs.Ground enhancement materials. Multilayer soil resistivity measurements and modelling.Safety criteria and reach touch voltage concept.High-frequency modelling.

Earthing Systems Design

What is the earthing system design process?What are the relevant earthing design standards?Applicable safety criteria and how to use them.How to determine acceptable step and touch voltages.Distribution system earthing:What resistance should the grid be?Should HV and LV be common bonded or separately earthed?Understanding the relevant project requirements.Structuring a professional earthing design report.Hands-on practical design of a substation earthing system following all the steps.

Lightning Protection Design

Risk analysis for lightning protection design.What are the methods for lightning protection design (rolling sphere, collection volume, protection angle)?Hands-on design of a substation lightning protection system using the rolling sphere method.

Technical Features and Modules of SafeGrid

What is the earthing system design process?How to use the modules including:Design Settings.Fault Current Distribution.Soil Modelling.Build Grid including importing CAD files.Safety Criteria and voltage profiles.Display Results.Hands-on practical exercises teaching how to use the modules.

Hands-on Software Modelling

Modelling of grids.Conductor sizing and modelling the effects.Optimal rod spacing.Soil resistivity modelling from Wenner field measurements.Fall-of-potential test simulation.Fault current distribution calculation for complex cable and overhead line systems.

Prerequisites

An understanding of basic earthing concepts such as what is grid resistance, grid potential rise, earth faults, and touch voltage, will help. You will need to have access to a licenced copy of ELEK SafeGrid Earthing Software. A general awareness of what the software is for, and its applications would be beneficial. Please contact us if you would need to organise a licenced copy of SafeGrid for the course.

What's Included

The registration fee covers live online attendance for one attendee. An official certificate of completion suitable for claiming CPD points.

About the Presenter

Jayson Patrick

Jayson is an electrical power engineer with 20 years of experience in electrical power engineering design and electrical power systems modelling.
Jayson is currently the technical director at ELEK Software and leads a team of electrical power engineers, technical researchers, and software developers.
Jayson has extensive experience delivering technical software training and presenting technial papers to audiences.

Terms & Conditions

1. Pricing and TaxAll prices quoted are exclusive of GST unless otherwise specified.2. Course Booking and ConfirmationBookings are confirmed only upon full payment.A confirmation email with event details, access links, and materials will be issued once registration is complete.ELEK reserves the right to decline registrations if participant limits are exceeded or if eligibility criteria are not met.3. Cancellations and RefundsCancellations made more than five (5) business days prior to the scheduled start date may be transferred to another available session without penalty.Cancellations made within five (5) business days of the course start date will forfeit the full course fee.Substitute attendees are welcome at no additional charge.If ELEK cancels or reschedules a session due to insufficient participant numbers or unforeseen circumstances, participants will be notified.4. Course DeliveryTraining sessions may be conducted in person or online.5. Certificates and Professional Development (CPD)Courses qualify for Type II CPD hours (as listed in each session).6. Intellectual PropertyAll course materials, software demonstrations, and recordings remain the intellectual property of ELEK Software.Participants may not reproduce, share, or distribute content without prior written consent.7. Data Privacy and CommunicationParticipant information will be used strictly for event administration and relevant ELEK communications (as per our Privacy Policy).ELEK complies with the Spam Act 2003 (Cth) and all relevant privacy regulations.8. LiabilityELEK Software will not be liable for indirect, incidental, or consequential damages arising from participation in the course or reliance on training content.Total liability shall not exceed the course fee paid.9. Governing LawThese terms are governed by the laws of New South Wales, Australia, and disputes shall be resolved in its courts.10. ContactFor any questions regarding terms, cancellations, or registration:sales@elek.com ELEK Software, Level 6.03, 234–242 George Street, Sydney NSW 2000, Australia

Pricing

Tickets

The numbers below include tickets for this event already in your cart. Clicking "Get Tickets" will allow you to edit any existing attendee information as well as change ticket quantities.

Earthing & Lightning System Modelling and Design Training (Live in GMT) [17/2/26]

USD
1,100.00

18 available

Quantity

Quantity:
0

Total:

USD
0.00

Get Tickets

Change Currency:

USD (Default)

AUD

EUR

GBP

CAD

NZD

BRL

CHF

DKK

HKD

ILS

INR

JPY

MXN

NOK

PLN

SEK

SGD

ZAR

Low-voltage Electrical Design Software Training to Australian Standards
2025-02-05 09:00 - 17:00, 2024-12-04 09:00 - 17:00, 2024-10-02 09:00 - 17:00, 2024-08-28 09:00 - 17:00 (Australia/Sydney) | Delivered Online via Live Stream in AEST timezone (GMT+10), Level 5, 11 York Street, Sydney, NSW, Australia

Earthing & Lightning System Modelling and Design Training (Live in BST)
2024-09-25 09:00 - 2024-09-27 13:00 (Europe/London) | Delivered Online via Live Stream in UK timezone (GMT), Level 5, 11 York Street, Sydney, NSW, Australia

Earthing & Lightning System Modelling and Design Training (Live in AEST)
2024-08-22 08:30 - 2024-08-23 12:30 (Australia/Sydney) | Delivered Online via Live Stream in AEST timezone (GMT+10), Level 5, 11 York Street, Sydney, NSW, Australia
