Low-voltage Electrical Design Software Training to Australian Standards
2024-12-04 09:00 - 17:00 (Australia/Sydney) | Delivered Online via Live Stream in AEST timezone (GMT+10), Level 5, 11 York Street, Sydney, NSW, Australia
Home / Training / Events

Events

February 4

-

February 6

Ready to book?

Get Tickets

Course Overview

This practical hands-on course will help you to become an expert at performing power cable ampacity calculations for power cable systems of any type and voltage level. The course is delivered by our team of cable ratings and systems design experts via online using presentations, hands-on practical exercises, live demonstrations, and Q&A sessions. The course is suitable for attendees from beginner level to seasoned cable experts. Attendees are sure to gain a lot of useful practical skills and technical knowledge. This course is eligible to 12 hours of professional development (CPD) with Engineers Australia, and other such engineering accreditating institutions.

Attendance Options

Live Online

12 hours delivered over three consecutive days during business hours in London (GMT) timezone.

Ready to book?

Get Tickets

Course Outline

This course will cover the following aspects of HV power cable current rating calculations. ELEK Cable HV Software will be used extensively for the hands-on modelling.

Fundamentals of Cable Rating Calculations

The fundamental current rating equations explained.Ladder network of a cable system explained.The main standards and technical references.What are dielectric and joule losses, thermal resistances (and capacitances), and how are they calculated?What is load factor and how is it calculated?How do you calculate cable temperatures?Understanding the current rating for various installation methods:Cables in air and trays.Groups of cables.Buried cables and in backfill.Soil drying out.Cables in ducts.Unfilled troughs.Ventilated tunnels.Riser poles.Offshore J/I-tubes.Submarine (underwater).Hands-on calculations and modelling by the attendees for the various installation methods.

Transient and Dynamic Cable Rating Calculations

Emergency and cyclic cable ratings explained.What is the complete transient response of a cable?How do you calculate emergency rating?How do you calculate cyclic rating to IEC 60853-2 and Neher-McGrath methods?Hands-on case studies calculating the emergency ratings for a HV cable transmission line and the cyclic rating.

Power Cable Modelling

What are the main components of a power cable?
General and layer-specific modelling guidance points.
How do we model the cores, conductors, insulation, screens, sheaths, armour, external coverings, and pipes?
How should lay length be considered?
How do you properly model cables from manufacturer datasheets?
How do you accurately model a three-core cable with magnetic armour?
What are the maximum operating temperature limits and how do we apply them?
HVDC electrical stress-limited rating explained.
Hands-on practical modelling of different cable types including, MV 1/3C, DC solar, 3C armoured submarine, sector-shaped, oil-filled, HVDC, and pipe-type.

Finite Element Modelling of Cable Systems

How do finite element method (FEM) calculations work for cable ratings?What are the drawbacks and limitations of IEC 60287?What are the benefits of using FEM for cable ratings?Non-isothermal and isothermal assumptions explained.Touching versus non-touching cables.How do the ratings from FEM compare with IEC 60287?Hands-on design using FEM to model an installation comprising multiple buried circuits within multi-zoned soil.

Bonding Arrangements

Why and when do we use special sheath bonding arrangements?
How do you calculate circulating and eddy current sheath losses?
How do the losses affect the cable rating?
How do you calculate sheath standing voltage and what is the safe limit?
The following bonding methods are explained:

Solid bonding.
Single-point bonding.
Cross-bonding.

What are the design considerations, advantages and disadvantages for the different methods?
How do phase spacings, transpositions, and section lengths affect the cable rating?
How do you specify an earth continuity conductor (ECC) and a sheath voltage limiter (SVL)?
Hands-on practical exercises teaching the different bonding arrangements.

Special Calculations

How are sequence impedance calculations performed?What are the safe limits for magnetic field density and how is it calculated?What are the affects on ratings of multiple cable crossings?How do you calculate the rating of cables in filled (and covered) cable trays?How do you calculate cable short-circuit ratings?What is the rating for deeply buried cables?Hands-on modelling of various case studies including crossing of MV cable with multiple LVDC cables in a solar farm.

Prerequisites

An understanding of basic cable system concepts such power cable types and construction, what is current rating and why is it needed, what are bonding arrangements, will help. You will need to have access to a licenced copy of ELEK Cable High Voltage Software. A general awareness of what the software is for, and its applications would be beneficial. Please contact us if you would need to organise a licenced copy of ELEK Cable HV for the course.

What's Included

The registration fee covers live online attendance for one attendee. An official certificate of completion suitable for claiming CPD points.

About the Presenter

Jayson Patrick

Jayson is an electrical power engineer with 20 years of experience in electrical power engineering design and electrical power systems modelling.
Jayson is currently the technical director at ELEK Software and leads a team of electrical power engineers, technical researchers, and software developers.
Jayson has extensive experience delivering technical software training and presenting technial papers to audiences.

Terms & Conditions

1. Pricing and TaxAll prices quoted are exclusive of GST unless otherwise specified.2. Course Booking and ConfirmationBookings are confirmed only upon full payment.A confirmation email with event details, access links, and materials will be issued once registration is complete.ELEK reserves the right to decline registrations if participant limits are exceeded or if eligibility criteria are not met.3. Cancellations and RefundsCancellations made more than five (5) business days prior to the scheduled start date may be transferred to another available session without penalty.Cancellations made within five (5) business days of the course start date will forfeit the full course fee.Substitute attendees are welcome at no additional charge.If ELEK cancels or reschedules a session due to insufficient participant numbers or unforeseen circumstances, participants will be notified.4. Course DeliveryTraining sessions may be conducted in person or online.5. Certificates and Professional Development (CPD)Courses qualify for Type II CPD hours (as listed in each session).6. Intellectual PropertyAll course materials, software demonstrations, and recordings remain the intellectual property of ELEK Software.Participants may not reproduce, share, or distribute content without prior written consent.7. Data Privacy and CommunicationParticipant information will be used strictly for event administration and relevant ELEK communications (as per our Privacy Policy).ELEK complies with the Spam Act 2003 (Cth) and all relevant privacy regulations.8. LiabilityELEK Software will not be liable for indirect, incidental, or consequential damages arising from participation in the course or reliance on training content.Total liability shall not exceed the course fee paid.9. Governing LawThese terms are governed by the laws of New South Wales, Australia, and disputes shall be resolved in its courts.10. ContactFor any questions regarding terms, cancellations, or registration:sales@elek.com ELEK Software, Level 6.03, 234–242 George Street, Sydney NSW 2000, Australia

Pricing

Tickets

The numbers below include tickets for this event already in your cart. Clicking "Get Tickets" will allow you to edit any existing attendee information as well as change ticket quantities.

High Voltage Power Cable Ampacity and Design Training (Live in GMT) [4/2/26]

USD
1,300.00

16 available

Decrease ticket quantity for High Voltage Power Cable Ampacity and Design Training (Live in GMT) [4/2/26]
-

Quantity

Increase ticket quantity for High Voltage Power Cable Ampacity and Design Training (Live in GMT) [4/2/26]
+

Quantity:
0

Total:

USD
0.00

Get Tickets

Change Currency:

USD (Default)

AUD

EUR

GBP

CAD

NZD

BRL

CHF

DKK

HKD

ILS

INR

JPY

MXN

NOK

PLN

SEK

SGD

ZAR

Low-voltage Electrical Design Software Training to Australian Standards
2025-02-05 09:00 - 17:00 (Australia/Sydney) | Delivered Online via Live Stream in AEST timezone (GMT+10), Level 5, 11 York Street, Sydney, NSW, Australia
Home / Training / Events

Events

February 4

-

February 6

Ready to book?

Get Tickets

Course Overview

This practical hands-on course will help you to become an expert at performing power cable ampacity calculations for power cable systems of any type and voltage level. The course is delivered by our team of cable ratings and systems design experts via online using presentations, hands-on practical exercises, live demonstrations, and Q&A sessions. The course is suitable for attendees from beginner level to seasoned cable experts. Attendees are sure to gain a lot of useful practical skills and technical knowledge. This course is eligible to 12 hours of professional development (CPD) with Engineers Australia, and other such engineering accreditating institutions.

Attendance Options

Live Online

12 hours delivered over three consecutive days during business hours in London (GMT) timezone.

Ready to book?

Get Tickets

Course Outline

This course will cover the following aspects of HV power cable current rating calculations. ELEK Cable HV Software will be used extensively for the hands-on modelling.

Fundamentals of Cable Rating Calculations

The fundamental current rating equations explained.Ladder network of a cable system explained.The main standards and technical references.What are dielectric and joule losses, thermal resistances (and capacitances), and how are they calculated?What is load factor and how is it calculated?How do you calculate cable temperatures?Understanding the current rating for various installation methods:Cables in air and trays.Groups of cables.Buried cables and in backfill.Soil drying out.Cables in ducts.Unfilled troughs.Ventilated tunnels.Riser poles.Offshore J/I-tubes.Submarine (underwater).Hands-on calculations and modelling by the attendees for the various installation methods.

Transient and Dynamic Cable Rating Calculations

Emergency and cyclic cable ratings explained.What is the complete transient response of a cable?How do you calculate emergency rating?How do you calculate cyclic rating to IEC 60853-2 and Neher-McGrath methods?Hands-on case studies calculating the emergency ratings for a HV cable transmission line and the cyclic rating.

Power Cable Modelling

What are the main components of a power cable?
General and layer-specific modelling guidance points.
How do we model the cores, conductors, insulation, screens, sheaths, armour, external coverings, and pipes?
How should lay length be considered?
How do you properly model cables from manufacturer datasheets?
How do you accurately model a three-core cable with magnetic armour?
What are the maximum operating temperature limits and how do we apply them?
HVDC electrical stress-limited rating explained.
Hands-on practical modelling of different cable types including, MV 1/3C, DC solar, 3C armoured submarine, sector-shaped, oil-filled, HVDC, and pipe-type.

Finite Element Modelling of Cable Systems

How do finite element method (FEM) calculations work for cable ratings?What are the drawbacks and limitations of IEC 60287?What are the benefits of using FEM for cable ratings?Non-isothermal and isothermal assumptions explained.Touching versus non-touching cables.How do the ratings from FEM compare with IEC 60287?Hands-on design using FEM to model an installation comprising multiple buried circuits within multi-zoned soil.

Bonding Arrangements

Why and when do we use special sheath bonding arrangements?
How do you calculate circulating and eddy current sheath losses?
How do the losses affect the cable rating?
How do you calculate sheath standing voltage and what is the safe limit?
The following bonding methods are explained:

Solid bonding.
Single-point bonding.
Cross-bonding.

What are the design considerations, advantages and disadvantages for the different methods?
How do phase spacings, transpositions, and section lengths affect the cable rating?
How do you specify an earth continuity conductor (ECC) and a sheath voltage limiter (SVL)?
Hands-on practical exercises teaching the different bonding arrangements.

Special Calculations

How are sequence impedance calculations performed?What are the safe limits for magnetic field density and how is it calculated?What are the affects on ratings of multiple cable crossings?How do you calculate the rating of cables in filled (and covered) cable trays?How do you calculate cable short-circuit ratings?What is the rating for deeply buried cables?Hands-on modelling of various case studies including crossing of MV cable with multiple LVDC cables in a solar farm.

Prerequisites

An understanding of basic cable system concepts such power cable types and construction, what is current rating and why is it needed, what are bonding arrangements, will help. You will need to have access to a licenced copy of ELEK Cable High Voltage Software. A general awareness of what the software is for, and its applications would be beneficial. Please contact us if you would need to organise a licenced copy of ELEK Cable HV for the course.

What's Included

The registration fee covers live online attendance for one attendee. An official certificate of completion suitable for claiming CPD points.

About the Presenter

Jayson Patrick

Jayson is an electrical power engineer with 20 years of experience in electrical power engineering design and electrical power systems modelling.
Jayson is currently the technical director at ELEK Software and leads a team of electrical power engineers, technical researchers, and software developers.
Jayson has extensive experience delivering technical software training and presenting technial papers to audiences.

Terms & Conditions

1. Pricing and TaxAll prices quoted are exclusive of GST unless otherwise specified.2. Course Booking and ConfirmationBookings are confirmed only upon full payment.A confirmation email with event details, access links, and materials will be issued once registration is complete.ELEK reserves the right to decline registrations if participant limits are exceeded or if eligibility criteria are not met.3. Cancellations and RefundsCancellations made more than five (5) business days prior to the scheduled start date may be transferred to another available session without penalty.Cancellations made within five (5) business days of the course start date will forfeit the full course fee.Substitute attendees are welcome at no additional charge.If ELEK cancels or reschedules a session due to insufficient participant numbers or unforeseen circumstances, participants will be notified.4. Course DeliveryTraining sessions may be conducted in person or online.5. Certificates and Professional Development (CPD)Courses qualify for Type II CPD hours (as listed in each session).6. Intellectual PropertyAll course materials, software demonstrations, and recordings remain the intellectual property of ELEK Software.Participants may not reproduce, share, or distribute content without prior written consent.7. Data Privacy and CommunicationParticipant information will be used strictly for event administration and relevant ELEK communications (as per our Privacy Policy).ELEK complies with the Spam Act 2003 (Cth) and all relevant privacy regulations.8. LiabilityELEK Software will not be liable for indirect, incidental, or consequential damages arising from participation in the course or reliance on training content.Total liability shall not exceed the course fee paid.9. Governing LawThese terms are governed by the laws of New South Wales, Australia, and disputes shall be resolved in its courts.10. ContactFor any questions regarding terms, cancellations, or registration:sales@elek.com ELEK Software, Level 6.03, 234–242 George Street, Sydney NSW 2000, Australia

Pricing

Tickets

The numbers below include tickets for this event already in your cart. Clicking "Get Tickets" will allow you to edit any existing attendee information as well as change ticket quantities.

High Voltage Power Cable Ampacity and Design Training (Live in GMT) [4/2/26]

USD
1,300.00

16 available

Quantity

Quantity:
0

Total:

USD
0.00

Get Tickets

Change Currency:

USD (Default)

AUD

EUR

GBP

CAD

NZD

BRL

CHF

DKK

HKD

ILS

INR

JPY

MXN

NOK

PLN

SEK

SGD

ZAR

High Voltage Power Cable Ampacity and Design Training (Live in GMT)
2025-03-19 08:00 - 2025-03-21 12:00 (Europe/London) | Delivered Online via Live Stream in UK timezone (GMT), Level 5, 11 York Street, Sydney, NSW, Australia

High Voltage Power Cable Ampacity and Design Training (Live in AEST)
2025-03-26 09:00 - 2025-03-27 13:00 (Australia/Sydney) | Delivered Online via Live Stream in AEST timezone (GMT+10), Level 5, 11 York Street, Sydney, NSW, Australia

High Voltage Power Cable Ampacity and Design Training (Live in AEDT) [2/2/26]
2026-02-02 09:00 - 2026-02-03 13:00 (Australia/Sydney) | Delivered Online via Live Stream in AEST timezone (GMT+10), Level 5, 11 York Street, Sydney, NSW, Australia

High Voltage Power Cable Ampacity and Design Training (Live in GMT) [4/2/26]
2026-02-04 - 2026-02-06 | Delivered Online via Live Stream in UK timezone (GMT), Level 5, 11 York Street, Sydney, NSW, Australia

Earthing & Lightning System Modelling and Design Training (Live in AEDT) [12/2/26]
2026-02-12 08:30 - 2026-02-13 12:30 (Australia/Sydney) | Delivered Online via Live Stream in AEST timezone (GMT+10), Level 5, 11 York Street, Sydney, NSW, Australia

Earthing & Lightning System Modelling and Design Training (Live in GMT) [17/2/26]
2026-02-17 - 2026-02-19 | Delivered Online via Live Stream in UK timezone (GMT), Level 5, 11 York Street, Sydney, NSW, Australia
